Control devices remotely. Creating your home server. Host games are parties through LAN. Stream available network content. Share files with connected devices. Communicate with the network devices.
These are amazing tasks and do not require the internet. Even though you may be able to perform these tasks, the router must have the features.
How To Access Router Without Internet Connection?
It is important to find out the IP address of the router to access the router without an active internet connection. Here are the steps to find out the IP address of the router. Step 1: Use an Ethernet cable and connect the router to your computer. Step 2: Go to the search box and type “CMD.” Step 3: Open the command prompt. Step 4: Type “ipconfig” and press Enter. Step 5: This Gateway has your IP address. Step 6: Copy the IP address and paste it to any browser. Step 7: Now you will be on the access page of the router. Step 8: Log in to the router.
How To Setup A Wireless Network Without Internet?
By following the guidelines, you will be able to set up a wireless network without internet conveniently. What you will be needing is a wireless network, network switch, and Ethernet cables. You will have to follow these steps.
Step 1: Connect Your Router to a Power Source:
Begin by connecting your router to the power source. You will have to power it on with the help of an adapter. Make sure that the signal LEDs of the router is turned on.
Step 2: Connect Your Router to a PC:
You will have to look for the Ethernet ports. Although most of the routers have four ports, they will feature a mark or a colored Ethernet port. However, you don’t have to use the internet Ethernet port. You can now use the Ethernet cable to connect one part with your computer and the other to the router.
Step 3: Configure Your Router’s DHCP Server:
The next step is to configure the DHCP server of your router. Here is how you can do that. Go to any web browser and enter the IP address of the router. On the router’s settings page, you will have to log in. Navigate to the DHCP page. Initiate the IP pool range. You must leave the IP address of the router. If the IP address is 192.168.0.1, the setup range will be 192.168.0.2 to 192.1 68.0.254. Hit on the option Apply.
Step 4: Set up the wireless settings:
In the next step, you will have to change the wireless settings. All you have to do is to change the username and password. These are the steps to do it. Navigate to the router’s wireless configuration menu. Set up the name of the SSID. The security protocol must be set up to WPA2. Enter a strong password and hit on Apply. The router can take some time for the boot-up process
Step 5: Test A Device:
Begin by logging into the network and turning off the Wi-Fi of any device. When the device is connected to any network and shows it, you are ready to use your home LAN. To use more than three devices, you will have to utilize a network switch.
Conclusion
The above-mentioned steps will enable you to use your router without an internet connection. This will offer you many benefits as you can perform many tasks. All you have to know is that the wireless router allows you to use it within a local network but not the internet. However, performing all these will require the wireless router’s IP address. Comment * Name * Email * Website
Δ
